06-15-2015 11:49 AM
I am trying to find out how close Microzed JX1 and JX2 are to Picozed JX1 and JX2. I see that mechanically, they fit the same footprint, but do not yet have conclusions on compatibility.
I would like to use the Avnet MicroZed Breakout Carrier Card with the Picozed, has anyone tried this? It seems very attractive to use a $60 test board instead of buying the official Pizozed $425 board...
Thanks in advance,
Solved! Go to Solution.
07-21-2015 12:25 PM
For those interested, JX1 and JX2 are mechanically the same on both Microzed and Picozed.
We had to apply jumpers to breakout the JTAG since the Microzed has the JTAG recepticle on its board.
Other than that, we have had no issues with the hack.