10-09-2012 05:56 AM - edited 10-09-2012 05:56 AM
I have put in a request to create a new category called "FMC – HDMI I/O + VITA Image Sensor".
I will respond with link once it is online ...
10-09-2012 06:26 AM
Okay, I'll assume that this thread can be moved to the new category once the new category is online and ask some specific questions.
I'm going through the tutorial entitled "FMC-IMAGEON - Building a Video Design from Scratch Tutorial - 14.1 - 20120709" using Xilinx software 14.2 and have found some places it doesn't match what I am seeing so I want to make sure it's alright.
On page 10, step 6, the text has a note stating "The Base System Builder does not yet support the Processing System". Since in 14.2 it does support Zynq, I've gone through the BSB process instead of steps 7-11.
On page 13, step 34 and Figure 7, the text shows axi_interconnect_1 whereas my software shows axi4lite_0 (IP version is the same). Is this due to the software upgrade? Is it a problem?
On page 14, step 37, INTERCONNECT_ARESETN has processing_system7_0::M_AXI_GP0_ARESETN instead of Processing_ps7_0:FCLK_RESET0_N. Is this a problem?
On page 14, step 38, the fmc_imageon_iic_0_Reset_pin "Connection" column says "Renamed from fmc_imageon_iic_0_Gpo_pin to fmc_imageon_iic_0_Reset_pin". How do you rename it?
10-11-2012 08:05 AM - edited 10-11-2012 01:40 PM
I have completed a 14.2 version of the tutorial.
I have addressed the 14.2 (versus 14.1) differences as well as some of your queries.
Let me know what you think.
You can download the new 14.2 version from this link:
File name: FMC_IMAGEON_Building_Video_Design_Tutorial_14_2_20121011.zip
Website link: https://avnet.egnyte.com/h-s/20121011/e77025c3576b4b41
10-12-2012 01:32 PM
The community forum board, specific to the FMC-IMAGEON hardware, is now online:
Avnet Development Boards => FMC - HDMI I/O + VITA Image Sensor
10-16-2012 09:17 AM
01-31-2014 09:23 AM
Is there any newer version of this tutorial available? I recently installed PlanAhead 14.6, and SDK built8.6, but I am not able to implement this tutorial. (FMC_IMAGEON_Building_Video_Design_Tutorial_14_2_20121011)
I can not import peripherials...
Thank you for any guidance. I would like to set up my ZC702 board with the camera.
07-26-2018 11:53 PM - edited 07-26-2018 11:54 PM
VITA-2000 image sensor (including optics, tripod, and LCEDI cable) NOTE : Spread Spectrum Clocking (SSC) is used on the FMC-IMAGEON module's HDMI output interface (HDMIO_CLK) to reduce radiated emissions to industry approved levels. Liteblue