Reply
Highlighted
sr
Regular Visitor
Posts: 2
Registered: ‎09-10-2009

interface between spartan 6 FPGA and OMAP UPP interface

We are using spartan6 FPGA +OMAP based board. We are planning to use UPP interface between OMAP and FPGA.   We planned to use channel A as a bidirectional bus.  OMAP initially transmit some data (around 100 cycles) to FPGA and  later it will start receive data streaming from FPGA.  

My Question is is it possible to configure single channel as both transmitter and Receiver.