New Member
Posts: 1
Registered: ‎02-17-2011

TwinCat just finds RT-Ethernet Device

Hi All,


I've tried to get the Ethercat demo running. But when I install the TwinCat software it just finds the device as RT-Ethernet and not as Ethercat. In the user guide is mentioned to install the driver manually and check if the jumper on JP6 is set. I've checked both but with the result that the device is RT-Ethernet. I have an Intel 82566MM ethernet controller which should be supported by the driver. Any ideas what else I can check or try?


Thanks for your help.


Best regards,