02-25-2015 05:29 AM
It is possible or there is a guide available about how to talk with the PSoC3 to perform the following operations:
1 - program the FPGA via USB.
2- Use the PSoC3 as interface communication between the FPGA and PC.
I want make my own programmer in Linux, and debug aplications talking with the FPGA from Linux terminal.
Thank you very much!
03-02-2015 12:12 PM
It is definitley possible to use the PSoC-3 USB interface to establish communications between the PC and the FPGA.
We provide an example of how to do this with our AvProg application which is available from the Support Files and Downloads page for this board:
Although AvProg is only supported on Windows machines, you could theoretically setup the same type of application under Linux as well.