Reply
Visitor
Posts: 3
Registered: ‎07-25-2013

program the ADC of FMC150 card

Dear Sir/Madame

 

In order to change some register of the ADC of FMC150, I changed the ads62p49_init.coe file. I rebuilt the reference design of the Kintex7 and FMC150 the upload the new *.bit file on the FPGA but the ADC output shows that the registers have not changed. Would you please help me and tell me if I have done the correct procedure? If yes, why the registers have not changed?

 

Regards